Posted on

KOSUN MD series high efficiency mud cleaner

KOSUN MD series high efficiency mud cleaner is the second and third level solid control equipment of drilling fluid purification system, which can further separate the smaller particles solid phase contained in the mud treated by shale shaker, so that the mud can enter the fourth level separation equipment.

Features and advantages of KOSUN drilling mud cleaner:

1. Both desander and desilter hydrocyclones are made of polyurethane, high-chromium cast iron or ceramic and other wear-resistant materials;

2. The desander is equipped with 1-3 10° or 12° desander cyclones, which can separate particles of 45-74 microns;

3. The desilter is equipped with 8-20 4″ or 5″ desilter cyclones, which can separate particles of 15-44 microns;

4. During operation, the screen bed angle can be adjusted manually, with reliable performance, compact design and small space consumption;

5. Hook screen can be quickly replaced into a flat screen.

Precautions for mud cleaner operation:

1. Prior to the operation and maintenance of the cleaner, it is necessary to understand its structure and performance, as well as its installation in the well site through the manual;

2. Before using the cleaner, it is necessary to check whether the transport fixed bolt of the vibrating screen has been removed. During operation and maintenance, it is necessary to check whether the installation of the equipment is reliable and whether all parts have been connected in good condition;

3. Understand and be familiar with the working principle, working process, function of operation buttons, working pressure and screen cleaning of the cleaner;

4. Any parts shall not be adjusted or removed during use, and inspection and maintenance shall not be carried out during operation;

5. Make sure the power is off before the mud cleaner is maintained.

Kosun- China Solids Control Leader&Drilling Waste Management Expert

Tel.: +86 29 87304914

Email: sales2@adkosun.com

Contact person: Jinbo Zheng

Contact person: Jinbo Zheng

http://www.kosun.com

http://www.kosuneco.com

Posted on

Why more and more clients choose to use KOSUN’s linear motion shale shaker?

Kosun’s linear motion shale shaker is a new and efficient screening equipment, widely used in mining, coal, smelting, building materials, refractory materials, light industry, chemical industry and other industries.Linear motion shale shaker is stable and reliable, low consumption, low noise, long life, vibration stability, screening efficiency.The linear motion shale shaker uses the vibration motor to excite the vibration type, causes the material to be tossed on the screen net, at the same time makes the straight line movement in front, the material enters the material inlet of the screening machine evenly from the feeding machine.The upper and lower sieves of various specifications are produced through a multilayer screen,from respective outlet eduction.With low energy consumption, high output, simple structure, easy maintenance, closed structure, no dust overflow, automatic discharge, more suitable for assembly line operation.

The linear motion shale shaker is driven by a double vibration motor. When two vibration motors are synchronous and counter-rotating, the exciting force generated by the eccentric block cancels each other in the direction parallel to the motor axis and overlapped as a resultant force in the direction perpendicular to the motor axis. Therefore, the motion trajectory of the screen machine is a straight line.Its two motor shafts have an inclination relative to the screen surface. Under the combined force of excitation force and the material’s gravity force, the material will be thrown up and jump forward to make a straight movement on the screen surface, so as to achieve the purpose of screening and classifying the material.Can be used in the pipeline to achieve automation.It has the characteristics of low energy consumption, high efficiency, simple structure, easy maintenance and completely closed structure without dust overflow.The highest mesh number is 325 mesh, which can screen out 7 materials with different particle size.

Features of KOSUN linear vibrating screen:

1. The feeding box is available in skid type and box type, which can be selected;

2. Can handle drilling fluid with large specific and large displacement;

3. The screen machine is exquisitely designed and easy to assemble. One person can operate the screen machine;

4. The screen Angle adjustment device, adjustment range – 1 ° ~ 5 °;

5. Excitation strength of high G force (which needs to be adjusted according to the working condition);

6. Fast cuttings conveying speed and high processing capacity;

7. Compared with other relevant brand manufacturers, it has larger screening area and high efficiency in processing.

Kosun- China Solids Control Leader&Drilling Waste Management Expert

Tel.: +86 29 87304914

Email: sales2@adkosun.com

Contact person: Jinbo Zheng

Contact person: Jinbo Zheng

http://www.kosun.com

http://www.kosuneco.com

Posted on

How Kosun’s vibrating screen works

When the vibrating screen works, the synchronous reverse rotation of the two motors makes the exciter generate reverse excitation force, forcing the screen body to drive the screen to do longitudinal movement, so that the materials on it are subject to excitation force and periodically throw a range forward, so as to complete the material screening operation.It is suitable for the screening of sand and stone in quarry, and can also be used for product classification in coal dressing, mineral dressing, building materials, electric power and chemical industry.

The working part of the vibrating screen is fixed, the material slides along the working face to screen the material.Fixed mesh screen is one of the most widely used in mineral processing plants. It is usually used for pre-screening before coarse crushing or medium-crushing.It has simple structure and convenient manufacture.Without power consumption, the ore can be directly discharged to the screen surface.The main disadvantages are low productivity, screening efficiency, generally only 50-60%.

Vibration screen working face is composed of a transverse arrangement of a rolling shaft which has a plate, fine particle material from the roller or the gap between the plate through.Large blocks of material are driven by rollers to a section and discharged from the end.This screen is seldom used in concentrating mills.Vibratory screen is cylinder-shaped, the whole screen around the axis of the cylinder mixed rotation, the axis in general is installed at a small Angle.The material is fed from one section of the cylinder, the fine grade material passes through the screen hole on the cylinder surface, and the coarse material is discharged from the other end of the cylinder.The rotating speed of the cylinder is very low, the work is stable and the power balance is good.But its screen hole is easy to block, screening efficiency is low, small working area, low productivity.Concentrating mills rarely use it as a screening device.The collective vibrating screen is a plane shaking or vibrating.It can be divided into linear motion, circular motion, elliptical motion and complex motion.shaking and vibrating screens fall into this category.When the vibrating screen is working, the two motors are placed in opposite positions synchronously so that the exciter generates reverse excitation force, forcing the screen body to drive the screen to do longitudinal movement, so that the materials on it are subject to excitation force and periodically throw a range forward, thus completing the material screening operation.Shaking screen is a crank linkage as the transmission parts.The motor rotates the eccentric shaft through the belt and pulley, and makes the body reciprocate in a certain direction by connecting rod. 

The movement direction of the body is perpendicular to the center line of the support rod or suspension rod. Due to the swinging movement of the body, the materials on the screen surface move towards the discharging end at a certain speed, and the materials are screened at the same time.Compared with the above kinds of shaker, the productivity and screening efficiency of shaker are higher.Its disadvantage is poor dynamic balance.It is now rarely used in concentrating mills and it is replaced by more reasonably structured shakers.

Kosun- China Solids Control Leader&Drilling Waste Management Expert

Tel.: +86 29 87304914

Email: sales2@adkosun.com

Contact person: Jinbo Zheng

Online consulting:

http://www.kosun.com

http://www.kosuneco.com

Posted on

Kosun’s drilling mud treatment equipment: mud tank

The tank surface and the corridor of the mud tank are made of non-slip steel plate and non-slip strip net plate, and the tank surface railings are made of square steel pipe, with barrier-free foldable structure and solid insertion.The tank surface of the mud tank circulation system is equipped with clear water pipeline for cleaning the tank surface and equipment.The upper tank ladder uses channel steel as the main body, anti-skid strip net plate as the pedal, and both sides of the guardrail are provided with insurance hooks.Oil drilling mud tank is equipped with standard sand control and rainproof shed, and the tank is equipped with heat preservation pipeline.

As a mud carrier, the mud tank is an indispensable part of the mud circulation system, which can be used to complete mud weighting, mixing, solid-liquid separation, degassing and other processes.The mud tank carries mud circulation from the wellhead to the mud pump, and solids in the mud are separated step by step through the corresponding solid control equipment on the tank, and the mud is weighted and mixed with the system for deployment, so as to meet the drilling process requirements;The degassing equipment on the mud tank can remove the harmful gas in the mud, so as to ensure the environmental requirements and mud specific gravity of the work site;Mud tank adopts electrical centralized control.In the polar cold region, the tank is equipped with heating system and thermal insulation system.

Generally, the supporting equipment on the mud tank includes: drilling fluid vibrating screen, vacuum degasser, desander, desilter, integrated desander and desilter, liquid and gas separator, stirrer, sand pump, shear pump, centrifuge, electronic ignition device, mixing funnel, jet mixing device, mud gun, etc.

Mud tank is an indispensable equipment in the solid control system. Please pay attention when using it. Do not let the mud precipitate in the mud tank adhere to the tank wall.

Features of Kosun’s drilling mud tank:

1. The selected materials are all international materials, strong and durable;

2. The design of the heating and heat preservation system, can satisfy the using demand of the extremely cold area – 60 ℃;

3. The drilling mud tank base is made of skid-type structure, which can be dragged on site for convenient installation;

4. The positioning rod is connected between the tank and the tank, and the positioning is simple;

5. The built-in pipe manifold facilitates transportation and reduces the number of disassembly.

Posted on

Our desander can meet all your requirements for desander.



Kosun Environmental Engineering has solid and liquid separation core technology, driven by technology equipment manufacturing and engineering services, the current business has been involved in engineering machinery, industrial sludge treatment, river and lake sludge disposal, urban sludge treatment, soil remediation and tailings comprehensive utilization of six fields.With “Black Rhino” brand as registered trademark, the company has dozens of separation machinery related technology, won the shaanxi province famous trademark, xi ‘an famous brand products, small giant technology enterprises, xi ‘an industry leader and other honorary titles.

Kosun DS series desander is a two stage solid control equipment for drilling slurry treatment.Commonly used hydrocyclones with diameters of 12″ and 10″ are used to separate solid particles with particle sizes of 47-76µm in drilling mud.

Kosun DS series sand removal cleaner is a two-stage solid control equipment for drilling mud treatment. It is used to separate the solid particles with particle size of 47-76µm in drilling slurry.Application fields:large-scale oil drilling rig supporting, large-scale trenchless drilling rig supporting,shield engineering supporting, river dredging project supporting, etc.

Features of the desander cleaner:

1. Separate solid particles with particle size of 47-76µm in drilling mud;

2. Simple operation and maintenance, compact structure, small space occupied;

3. desanders with different specifications and handling capacities can be produced according to customers’ requirements;

4. The material can be polyurethane, high-chromium iron or ceramic wear-resistant materials;

5. The number and material of customized hydrocyclone can be selected..



Posted on

Kosun KDS-500 Shield Slurry Treatment System

Since the introduction of slurry balance shield, the slurry separation and treatment system and equipment have appeared.During the construction of slurry shield, slurry treatment is one of the important factors affecting the normal tunneling of the shield, and directly affects the construction schedule, construction cost and environmental protection.The application of slurry shield, along with the tunnel construction, is gradually developed from the city edge to the city center.Due to the limitation of the construction site, the mud water treatment equipment must cover a small area and have a high treatment rate, so an efficient and integrated slurry treatment equipment has become the first choice of the owner and the construction unit.

Xi’an Kosun Environmental Engineering co.,LTD,It is a professional company providing integrated solutions of solid waste treatment in the field of energy conservation and environmental protection, focusing on the development and service of complete sets of technologies and equipment such as sludge reduction and resource utilization.

Kosun Environmental Engineering co., ltd. helps customers with sludge reduction and disposal services, including: general contracting of sludge treatment, sludge treatment mobile site services, sludge treatment package solutions.

Kosun KDS-500 shield slurry treatment system is a modular design system.The system is designed for mud purification in medium sized slurry balance shield construction projects.The KDS-500 system is composed of a coarse vibrating screen module and two sets of sand removal modules. The coarse vibrating screen module is equipped with a coarse screen for removing large particles, and the sand removal module is equipped with a desander hydrocyclone and a fine vibrating screen.

cooperative partner

The slurry falls into the collecting box through the coarse vibrating screen, and then is separated and transported to two sets of sand removal modules through two connecting pipes. The sand removal module is equipped with a desander hydrocyclone, which can remove the sand in the slurry.After two levels of treatment, the effect of repeated circulation can be achieved.