Mixing and Grouting Plants, Mixing and Grounting Units and Stations

Mixing and Grouting Plants

Mixing and Grouting Plants or Mixing and Grouting unit(Mixing and Grouting Plants stations)are used in separation step during different projections, such as soil nails, tie-backs, soil mixing, jet grouting, grout compaction, vertical tie downs and injection grouting. Slurry obtained from field is not in its pure form.

It is usually mixed with particles and different liquids. Thus separation of these component in mixing and grounting plants is necessary. Kosun made system also give App end and PC control end to easily control the whole running.

Mixing and Grouting Plants
Mixing and Grouting Plants

For detailed phares in mixing and grouting plants(mixing and grouting units),the Separation of projection mud is done by the system which is an physical speparation flow.

Mixing and grounting stations

This Separation process is carried out by passing the slurry through an Separation. Mixing is brought in contact with the slurry at this time. High proportions of solids is scattered by shakers.

This process can be modified for extraction of specific slurry to increase its effectiveness. Extraction of other heavier slurry is up to 100% with use of this process. However for lighter solids, it is not an ideal process.

Mixing and grounting units

By the end of this process in mixing and grouting plants, 90 – 95 % of mud is obtained from the slurry stream. Move over, some energy is used to convert slurry from complex components into resuable slurry from by centrifuging it.

This decreases the cost associated with extraction of ethane from effluent. Thus separation of slurry from solids in mixing and grounting plants not only makes them pure and clean for use but also helps in obtaining valuable solids itself.

Fully understanding of the above detailed information will be hard, its a little bit different with TBM Separation plants or mine tailings treatment plants, but the real application case of the mixing and grounting plants is increasing the numbers day by day, some companies like Kosun from China have paid their attention on the related mechanics research. The performance is good, but still many progress can be achieved in the recent time. in the recent time.