When the vibrating screen works, the synchronous reverse rotation of the two motors makes the exciter generate reverse excitation force, forcing the screen body to drive the screen to do longitudinal movement, so that the materials on it are subject to excitation force and periodically throw a range forward, so as to complete the material screening operation.It is suitable for the screening of sand and stone in quarry, and can also be used for product classification in coal dressing, mineral dressing, building materials, electric power and chemical industry.
The working part of the vibrating screen is fixed, the material slides along the working face to screen the material.Fixed mesh screen is one of the most widely used in mineral processing plants. It is usually used for pre-screening before coarse crushing or medium-crushing.It has simple structure and convenient manufacture.Without power consumption, the ore can be directly discharged to the screen surface.The main disadvantages are low productivity, screening efficiency, generally only 50-60%.
Vibration screen working face is composed of a transverse arrangement of a rolling shaft which has a plate, fine particle material from the roller or the gap between the plate through.Large blocks of material are driven by rollers to a section and discharged from the end.This screen is seldom used in concentrating mills.Vibratory screen is cylinder-shaped, the whole screen around the axis of the cylinder mixed rotation, the axis in general is installed at a small Angle.The material is fed from one section of the cylinder, the fine grade material passes through the screen hole on the cylinder surface, and the coarse material is discharged from the other end of the cylinder.The rotating speed of the cylinder is very low, the work is stable and the power balance is good.But its screen hole is easy to block, screening efficiency is low, small working area, low productivity.Concentrating mills rarely use it as a screening device.The collective vibrating screen is a plane shaking or vibrating.It can be divided into linear motion, circular motion, elliptical motion and complex motion.shaking and vibrating screens fall into this category.When the vibrating screen is working, the two motors are placed in opposite positions synchronously so that the exciter generates reverse excitation force, forcing the screen body to drive the screen to do longitudinal movement, so that the materials on it are subject to excitation force and periodically throw a range forward, thus completing the material screening operation.Shaking screen is a crank linkage as the transmission parts.The motor rotates the eccentric shaft through the belt and pulley, and makes the body reciprocate in a certain direction by connecting rod.
The movement direction of the body is perpendicular to the center line of the support rod or suspension rod. Due to the swinging movement of the body, the materials on the screen surface move towards the discharging end at a certain speed, and the materials are screened at the same time.Compared with the above kinds of shaker, the productivity and screening efficiency of shaker are higher.Its disadvantage is poor dynamic balance.It is now rarely used in concentrating mills and it is replaced by more reasonably structured shakers.
Tel.: +86 29 87304914
Contact person: Jinbo Zheng