The application of vertical cuttings dryer is currently at home and abroad to solve the drilling waste management in areas such as solid-liquid separation dryer mud treatment equipment, the traditional waste sludge treatment is used more pressure filter, but the operation is more troublesome, and the intensity of labor is big, cost is high, and drilling cuttings dryer is the modern solid-liquid separation, it does not need to add chemicals, cover an area of an area small, simple operation, low cost but also strong processing capacity, processing waste solid phase moisture content is low.
With the continuous improvement of national environmental protection requirements, major oil fields are faced with the problem of drilling waste disposal.
The vc-1000 series vertical cuttings dryer produced by KOSUN is a vertical scraper discharge centrifuge, which separates solid and liquid phases through centrifugal separation principle. Vertical cuttings dryer can effectively recover liquid components in cuttings, making solid phase transition very dry. It is suitable for water-based mud, oil-based mud and synthetic mud to recover the mud in cuttings, thus reducing drilling costs and environmental pollution. Its processing capacity is 40~60 tons per hour, and the liquid content/oil content of the treated cuttings is lower than 5%, meeting international emission standards and environmental requirements. It can be used for cuttings treatment in land and sea drilling.
While working, raise the support of driller to the highest place to meet the driller’s driller discharge. The centrifuge is placed on the tank body of the pry seat, and the discharged liquid part flows directly into the bottom collection tank. While drilling fluid is needed, it can be delivered via a delivery pump or connected to a tank of similar height.
Drilling fluid desander is a combination of hydrocyclone desander and drilling fluid shaker. The main structure of the equipment is arranged in two upper and lower parts. The cyclone is arranged in the upper part. The small vibrating screen at the lower part is circular vibrating screen. The hydrocyclone desander is a secondary solid control device in the solid control system, which is used to separate solid particles with particle size larger than 47 microns in drilling fluid.
The drilling fluid desander produced by KOSUN is one of the important equipment for solid phase control of drilling fluid. Its function is to clear harmful solid phase, stabilize drilling fluid performance and improve drilling efficiency. According to the requirements of the customer, several groups of cyclones are selected to form the drilling fluid desander. The cyclone drilling fluid desander is widely used in oil drilling and horizontal directional drilling.
Features and advantages of drilling fluid desander produced by KOSUN:
The fast drilling fluid desander is a two-stage solid control device for handling drilling mud, which can separate solid particles between 45 and 74 microns.
The mud desander is made of polyurethane or high chromium cast iron with long service life;
Clip-on type, easy to maintain;
Compact design, small space;
According to different treatment capacity, 1, 2 or 3 10″ or 12″ cyclone can be flexibly selected;
Fast and flexible connection during user assembly.
Mud agitator is a kind of drilling fluid canister type solid control equipment, which is mainly used for mi xing drilling fluid, preventing solid phase particles of drilling fluid from depositing in its canister type circulation system, making the circulating drilling fluid performance stable and mixed evenly. The mud agitator produced by Xi ‘an KOSUN has compact structure and small area. Smooth operation, low operating noise, few wearing parts, long service life, high cost performance, has been recognized by various oil exploration companies, exported to many countries.
KOSUN MA series mud agitator is the equipment of drilling fluid tank solid control system, which is mainly used for mixing drilling fluid, preventing solid phase particles from deposition in its tank circulating system, making the circulating drilling fluid performance stable and mixing evenly. Agitator is composed of explosion-proof motor, reducer, frame and wave wheel assembly. The motor is connected with the reducer and the reducer is connected with the wave wheel shaft through a rigid coupling. The wave wheel is welded with four blade groups.
Advantages of KOSUN mud agitator:
Optimized product structure, small floor space and compact structure;
Stable operation, low operating noise, long service life, few vulnerable parts, high cost performance;
High pressure airless spraying equipment is used for construction, and beautiful appearance and anticorrosive effect can be achieved through primer, medium paint, top paint and other processes;
The mud agitator shaft and impeller are finely polished by pickling, galvanizing, hot-dipping zinc and passivation, which greatly improves the service life and anti-corrosion effect.
Recently, 2 sets of ZJ15 fixed control system produced by KOSUN were successfully sent to the Ukrainian project site. Previously, KOSUN invited customers from the Ukrainian market to visit the factory to inspect the production process and work progress, and the customers gave a high evaluation of KOSUN’s professional products.
KOSUN production of ZJ15 drilling solids control system is a set of mechanical and electrical control of sludge treatment system, drilling mud can be hierarchical processing, at the same time, the drilling mud can be mixed, degassing, aggravating, mixing, can also be used to supply of wellhead mud, the Ukrainian market customer order system by mud mud tank, mixing tank, rotation of the crane and solids control equipment. The whole system includes vibration screen, vacuum deaerator two-stage solid control equipment, mud mix weight system, mud supply system, electrical control system, lighting system, etc. The surface coating of the system is durable, which can ensure that the system can be used in the wear and corrosion environment.
This ZJ15 drilling solids control system has several special designs of important processes, which can be used to grade drilling mud. The mud can also be weighted, mixed and stirred. Drug canisters and pipelines can provide slurry batching for the system; Mud system can be mixed and matched for system mud; Supply silo and supply line can supply mud supply for wellhead mud defect; Mud gun pipeline and mixing system can fully stir and mix in the mud tank; The clean water collection can provide water channel for slurry distribution and flushing tank surface.
ZJ15 drilling solids control system adopts multi-functional design, so that the system can meet the requirements of different mud systems, and each system and process can work independently or simultaneously.
KOSUN adopts the most advanced drilling fluid cleaner manufacturing process at home and abroad, to ensure the production of powerful, compact structure, easy to operate, easy to maintain drilling fluid cleaner.
KOSUN QZS series high efficiency mud cleaner is the secondary and tertiary drilling purification system of solids control equipment that can be further separated by the vibrating screen processed of smaller particles contained in mud solid phase, so that the mud into the level 4 separation equipment, MD series mud cleaner can be used alone, also can use its underflow vibrating screen as primary solids control parallel backup device of vibrating screen.
What are the equipment safety requirements when operating and maintaining the mud cleaner?
Confirm whether the base of the machine is firmly connected with the tank, and whether the inlet and outlet pipes are sealed well;
After connecting the main power supply, start the motor and make sure that the motor runs in the correct direction;
Do not strike or smash the cleaner.
Production features of KOSUN drilling fluid cleaner:
The main structure of the drilling fluid cleaner is arranged in two parts: the cyclone desander and the desilter are arranged in the upper part; the slide groove is set on the base and a mud vibrating screen is arranged on the slide, which makes the structure compact and occupies little space;
There is a control butterfly valve between the inlet and outlet pipes of the desander and the desilter, which can adjust the number of the desander and the desilter at any time. It is simple to operate and easy to maintain;
The cyclone desander and desilter are equipped with automatic sand control blocking device and bottom flow regulating device;
Different number of desander hydrocyclones and desilter hydrocyclones can be configured according to customer requirements and the actual situation on site.