The liquid-gas separator is mainly used to deal with large bubbles in drilling fluid.

The liquid-gas separator is mainly used to deal with large bubbles in drilling fluid. When gas invasion occurs, throttle exhaust operation should be carried out. When overflow occurs, kill the well; Drilling fluid enters the liquid-gas separator from the throttling manifold for degassing.

The drilling fluid separated from the above two conditions has small bubbles, which enter the vibrating screen for degassing, flow to the sunk sand bin, and then enter the vacuum degasser device for conventional degassing.

In the ultra-high pressure gas well drilling, because into the cylinder gas volume, liquid volume is very different. This requires that the treatment capacity of the separator should have a relatively wide range of adaptability, and its treatment capacity of gas and liquid should be able to meet the needs of well killing construction. In the design of the scheme, the following considerations should be taken into account:

  1. The task of the liquid-gas separator is to deal with the continuous gas phase and large bubbles;
  2. Provide appropriate residence time for small bubbles to gather in a certain depth below the liquid level;
  3. Solid debris cannot be deposited in the separator;
  4. Apart from the gas column reaching the wellhead, the separator can work normally.

Leave a Reply

Your email address will not be published.