kosun, Author at Solids control system, TBM slurry treatment plant, HDD mud recycling system, Drilling mud system-KOSUN

May 10, 2017July 20, 2020

Slurry TBM Treatment Stations of Kosun Manufacturer

Slurry TBM Treatment Stations

Slurry TBM treatment stations of Kosun manufacturer that focus on oil drilling, environmental protection 25 years and other areas of mud water treatment, mud separation solutions and equipment supply, Kosun Slurry treatment system are widely used at home and abroad.

1. Shield mud dehydration centrifuge, sewage dehydration correct. Dehydration centrifuge with high efficiency, energy saving, balance, high temperature, wear resistance and so on. Industrial centrifuges were born in Europe, such as the mid-19th century, there have been three-foot textile dehydration centrifuge, and the sugar factory separation of crystalline sugar with the hanging centrifuge. These early centrifuges are intermittent and artificial slag.

Kosun slurry tbm treatment stations — slurry tbm treatment stations

The centrifuge has a cylinder that rotates about its own axis at high speed, called a drum, usually driven by a motor. Suspension added to the drum, was quickly driven with the drum at the same speed rotation, under the action of centrifugal force components separated, and were discharged. Usually, the higher the drum speed, the better the separation effect.

2. Decanter centrifuge in environmental protection applications mainly refers to the industrial and civil wastewater treatment process of sludge dewatering. Today’s environmental problems become the focus of common concern around the world, in this context, the value of the decanter centrifuges is reflected in the previous sewage plants or related treatment plants are self-settling or the use of belt filter press sludge dewatering concentration, The test shows that the sludge moisture content is reduced from 98% to 80%, and the volume can be reduced by 10 times.

Because of this, the decanter centrifuge has the characteristics of large capacity, automatic operation and good dehydration effect in the environment The field of protection has been widely used and promoted. Decanter centrifuge single product sales accounted for about half of all centrifuge products, laid its irreplaceable position. In foreign countries, mud treatment equipment can choose] decanter centrifuge.

Slush, clear water, no follow-up costs, 24-hour operation of the equipment, stable operation, handsome in appearance, all closed without side leakage), the water supply,

May 5, 2017July 20, 2020

Desander Systems of Kosun Manufacturer

Desander Systems

Desander Systems series of desander cleaner is the treatment of drilling mud secondary control equipment. The DS series desander cleaner is a two-stage solid control device for drilling mud.

Commonly used cyclone diameter of 12 “and 10”, for the separation of drilling mud particle size of 47 ~ 76μm solid particles.

It is used to separate the solid particles in the drilling mud with particle size of 47 ~ 76μm. Application areas: large oil rig supporting, supporting large-scale non-excavation rigs, shield engineering support, river dredging works, etc.

Desander Cleaner Features:

1.Separation of drilling mud in the particle size of 47 ~ 76μm solid particles.

2.Compact structure, small footprint space.

3.the number of custom cyclone and material to choose from; its material can be used polyurethane, high chromium cast iron or ceramic wear materials.

4.Thick Steel Plate, the Perfect Hydraulic System
The equipment tank with 8mm thick steel plate, integrated in the tank inside the advanced water sand separation system. Base with 20mm thick steel plate, durable. Switch base with manual hydraulic system, and with safety bolts, so that the base switch and seal becomes simple, safe and convenient.

5. Dynamic and Stable
Equipment using advanced pneumatic diaphragm pump, driven by high-pressure gas, resulting in a steady stream of high-pressure water for the rapid demolition of sand to provide a strong driving force.

6. Environmental Protection and Energy Conservation
The whole debris removal process does not damage the water in the tank, will not cause water waste.

7. Mobile and Flexible
The device is equipped with a forklift fork for the use of the ear block, easy to move, a sand removal equipment can be used for multiple water knives.

Desander Systems from Brand Kosun Manufacturer with more than 20 years experience and is well recognized by clients all over the world.

Welcome to contact us if you need any help.

May 4, 2017July 20, 2020

Mine Tailings Treatment Plants of Kosun Manufacturer

Mine Tailings Treatment Plants

Mine Tailings Treatment Plants play a very important role in protecting environmental. Tailings can not be arbitrarily discarded, concentrator tailings treatment not only with environmental protection, rational use of resources related issues, but also related to legal issues.

Mine Tailings treatment methods:
1. We must first try to do a good job of useful components of tailings recycling, the use of advanced technology and reasonable process for re-election tailings, the maximum recovery of useful components in the tailings, so Can be further reduced the number of tailings.
2. Tailings for mining underground mining mined areas of the filling material, that is, water sand filling material or cemented filling of the tailings as a goaf filling material used, the best filling The process is full tailings filling process, but is still in the experimental research stage. In the production are used in the tailings of the coarse-grained part of the mined-out area of the filler material. Section of the grading, the coarse sand part of the underground mined-out area, and the fine part of the pile into the tailings reservoir .This tailings treatment methods have been applied at home and abroad.

3. With tailings as building materials, raw materials: Production of cement, silicate tailings brick, tile, aerated concrete, cast stone, refractories, glass, ceramsite, concrete aggregate, glass-ceramic, slag tiles, foam glass and foam, etc.
4. Sand construction road, road surface material , Anti-skid materials, coastal fields, etc.
5. In the tailings accumulation field soil cultivation, planting crops or afforestation .
6. The tailings in the tailings of specialized construction of the tailings, which is the majority of the most widely used We need to know about the ball mill information, ball mill knowledge, consult the price of the ball mill, please contact Henan Gongyi emerging machinery factory. Our company has been to provide customers with high quality and efficient service. Our service intimate, well-made, the price of the Heart, so that customers “Customer-oriented” to provide customers with a comprehensive overall service; “to serve as the core” for customers tailored to create the most valuable products. “Quality as the focus”, full service to customers!

May 3, 2017July 20, 2020

Mine Tailings Treatment by Kosun Manufacturer

Mine Tailings Treatment

Mine tailings treatment is based on the size of tailings, graded treatment, graded use, that is, the hydrocyclone graded coarse sand (about 40%) filling the underground goaf and tail sand filling filling column, efficient centrifugation Filter filter, the dry sand stacked in the vicinity of the plant on the hillside, and the cover soil.

In the sedimentation tank, sewage treatment tank for secondary sewage treatment of 70 ~ 80% of the tailings water back to the plant re-use. The invention uses the small overflow dam of the sedimentation tank and the sewage treatment tank instead of the traditional tailings dam.

Tailings are the least valuable part of the target component in the beneficiation operation and are no longer suitable for sorting under current economic conditions. With the socio-economic and sorting technology development, tailings in the useful components can also be further recycling. While the other components in the tailings are not completely useless waste, according to its nature and composition can be comprehensive utilization, to achieve non-waste emissions, which is the full use of resources and environmental protection common requirements.

Tailings are misplaced resources, and their harmfulness is caused by improper handling. The hazards of tailings are mainly reflected in the harmfulness of elements and the harm of solid waste. The harmfulness of the elements is the flotation agent ions and other ions in the tailings. With the flow of water and air into the surrounding environment, it causes serious environmental pollution The tailings are the main components of industrial solid waste, and the accumulation of tailings is caused by the accumulation of land, vegetation destruction, land degradation, desertification and dust pollution, water pollution and so on.

From the protection of the environment and the full use of resources from the point of view, people put forward tailings, no tail emissions and other requirements. Now the overall idea of tailings comprehensive utilization is:
1. In the tailings comprehensive physical and chemical analysis, based on the re-election of the use of the value of the tailings re-election;
2. After the re-election after the tailings for simple processing As a building material or the use of tailings filled with mined areas;
3. The tailings for finishing, the production of high value-added building decoration materials; 4. Temporary can not use the tailings as ecological restoration materials for ecological restoration and reconstruction.

May 2, 2017October 17, 2017

Slurry Treatment Plants of Kosun

Slurry Treatment Plants

Slurry Treatment Plants are more important equipment for matching micro-tunnel boring machines. It consists of cyclone separation equipment and centrifugal equipment. The cyclone separation equipment consists of a cyclone and desalting machine.

Slurry Treatment Plants of Kosun — Slurry Treatment Plants

Mud treatment of the production process

First, the first stage separation is performed by the drilling fluid shale oscillator; the separated particles will be precisely treated by the hydrocyclone into particles of different sizes.

Second, the pressure of the mud through the pipeline into the cyclone high-speed system, and in the hydrocyclone on the inner wall of the rotary motion. The coarse particles are thrown onto the walls and gradually move down by gravity and discharged from the bottom. Due to the slow movement, the fine particles are driven from the center and discharged from the overflow pipe.

Thirdly, the particle size of the slurry after treatment with the cyclone system is very small. So we need to add flocculants to the mud. Flocculants and fine particles aggregate larger particles. And then pumped to the centrifuge. Centrifuges are an important part of ensuring that all water is separated into dry soils. A portion of the bentonite treated by the cyclone system can be discharged from the slurry pool. Mixed will continue to use, save construction costs. The separated solid particles can be transported directly. Separation of high purity water can be used to adjust the new mud or directly into the municipal rainwater system

Slurry Treatment Plants of Kosun with high quality and best after sale service that is very recognized by clients all over the world.

Kosun expressed gratitude for the support and trust of many customers at home and abroad. In the difficult period of the oil and gas industry, Kosun will be more dedication and dedication to strengthen the technological transformation and innovation, with more advanced technology and better after-sales service for the majority of customer service!

April 28, 2017October 17, 2017

Pipe Jacking Machine Mud System of Kosun Manufacturer

Pipe Jacking Machine Mud System

Pipe Jacking Machine Mud System can be understood as a mud separation system for supporting the mud for the pipe jacking machine. The mud produced in the construction of the pipe jacking is specially treated,

Pipe Jacking Machine Mud System is mainly composed of mud vibrating screen, desanding cyclone combination, demisting cyclone combination, gravel pump and electric control system.

In the pipe treatment of the pipe jacking, the pipe jacking system of the pipe jacking machine is responsible for the separation of the mud from the mud pipe during the tunneling process. Can greatly improve the site of mud water treatment efficiency and construction progress.

At present, there are many domestic manufacturers of mud separation system, but the actual application of the equipment is less, and Kosun machinery as the leading domestic 25 years of rich experience in the production of well-known pipe jacking machine slurry separation system equipment manufacturers, pipe jacking mud system, mud treatment equipment R & D production is very mature, many mud separation system exported to foreign countries.

In the field of micro shield, pipe jacking construction, continuous wall construction, urban construction piling, river dredging, environmental protection and other fields, can produce different specifications of the amount of mud separation system equipment used to support different caliber miniature shield machine, pipe jacking machine , Rotary drilling rigs and so on.

In the pipe jacking pipe system production process, from the design R & D production test machine, and other links, close communication with customers, strict checks to ensure product quality; Kosun mechanical pipe jacking mud system equipment, people-oriented, user-friendly design, Pay attention to workers’ safe operation, system design escalators and other safety measures.

Pipe Jacking Machine Mud System of Kosun is well recognized by clients all over the world owning to its high quality and best after sale service.

April 28, 2017June 23, 2017

Pipe Jacking Machine Slurry Separation System for Sale

Pipe Jacking Machine Slurry Separation System

Pipe Jacking Machine Slurry Separation System main function is to provide a pressure mud for the face of the pipe jacking pipe to establish the mud slurry, while the pipe cutting machine can be cut down from the continuous Constantly transported to the ground, and the separation of soil and mud treatment.

Pipe Jacking Machine Slurry System is an important part of pipe jacking construction. The pipe jacking construction is an underground pipe construction method developed after the construction of the shield. It does not require excavation of the surface layer and can cross roads, railways, rivers, ground buildings, underground structures and various underground pipelines. Pipe sprinkler mud system is an important part of pipe jacking construction.

Pipe jacking Construction tool tube or boring machine is lifted from the working well through the soil to the receiving shaft by means of thrust between the main cylinder and the inter-pipe interchanges. At the same time, it is followed by the tool tube or boring machine after the pipeline buried in the two wells, in order to achieve the construction of non-excavated underground pipeline construction methods.

The most prominent feature of pipe jacking construction is the adaptability problem. For different geological conditions, construction conditions and design requirements, the choice of the application of the pipe jacking with the need to match the appropriate pipe jacking pipe system How to correctly select the pipe jacking machine and supporting auxiliary equipment for the pipe jacking construction Is very critical.

According to customer demand, Kosun will be based on the actual needs of customers, customers recommend the most suitable products for customers to provide reliable, high-quality products.
Kosun will be dedicated to domestic and foreign customers with strong technical strength and improve after-sales service system. Coase looks forward to working with you for consultation and cooperation!

Kosun is confident in providing more cost-effective equipment and mud systems in 2017.

April 27, 2017July 20, 2020

Microtunnelling Mud System of Kosun Manufaturer for Sale

Microtunnelling Mud System

The micro-tunneling system is a remote control method for driving concrete, steel and CTP pipes under the surface. The system is mainly used in major roads, railways, subway lines, airports and river access areas; open excavation risk areas. In these areas, drinking water, sewage, natural gas, connected tunnels and similar works can be carried out by our miniature tunneling machines with diameters between 800mm and 3000mm.

In the micro-piping system constructed by pipeline laying, micro-tunneling tunneling and impact equipment automatically promote the pipeline in the mining area. When the cutting head is pushed by the hydraulic thrust system, once there is enough space to push the other pipe, connect the new pipe; the thrust program continues. The micro-tunnel machine distributes the soil by cutting and grinding the drill bit, and then the system injects pressurized water to make the material a liquid slurry. The liquid slurry is absorbed by the discharge pump present in the system and is brought into a discharge tank placed on the surface.

The traditional miniature mining method usually relies on the use of lifting tubes as it will push thrust from the jacking station to the drill bit before entering the line. In this case, the pipe selection is only related to the ground conditions, since the method does not require the use of highly structured pipelines.

“The system is compatible with high strength and low strength products, including PVC, PVE, concrete, clay, steel wrapped, ductile iron and HDPE.”

This versatility provides customers with more product pipeline options based on existing ground conditions, cost, traditional preferences, and matching with existing infrastructure.

Microtunnelling Mud System of Kosun Manufaturer with high quality and best after sale service that is well recognized by clients all over the world. Welcome to contact us if you need!

April 24, 2017July 20, 2020

Trench Cutter Slurry Separation System of Kosun Manufacturer

Trench Cutter, also known as double-wheel milling machine, a continuous wall into the slot equipment. Because of its high technical content, expensive, into the tank with high efficiency, known as the pile of mechanical family “luxury”, Trench Cutter construction must be equipped with professional trench cutter TBM slurry separation system world famous brands are Germany Bao, Italy Casa, soil and so on..

The underground continuous wall is usually used as a temporary or permanent retaining wall during construction of the foundation pit, and sometimes as a structure for bearing loads. Since the 1980s, the underground wall technology has been introduced into China’s construction industry and has so far been widely used in basic engineering.

Trench Cutter Slurry Separation System ,At present, domestic equipment for underground continuous wall construction are: hydraulic grapple and multi-axis rig, etc., these devices are able to better meet the soft ground conditions to even the wall construction requirements, but in the rock Or in the formation of some powerless.

From the geological structure of our country and the construction conditions of the project under construction, the two-wheel milling with Trench Cutter Slurry Separation System is basically applicable to 80% foundation pit maintenance project, especially in complex formation conditions, construction efficiency is far superior to hydraulic Grazing, election round milling greatly expanded the application of underground wall technology applications.

CSM is an innovative deep mixing method (see below). This process is derived from the German company’s double-cutting milling technology, is the combination of existing hydraulic milling machine and deep mixing technology for innovative geotechnical engineering construction of new technologies. Trench Cutter Slurry Separation System through the construction site in situ soil and cement slurry for mixing, can be used for cut-off walls, retaining walls, foundation reinforcement and other projects. Compared with other deep mixing process, CSM method is more adaptable to the formation, can cut hard layer.

April 24, 2017July 20, 2020

Rotary Drilling Rigs Slurry System from Kosun Manufacturer

Rotary Drilling Rigs Slurry System

Rotary Drilling Rigs Slurry System can help to drive the drilling mud to obtain formation information: a lot of information can be obtained by cutting the cuttings of the chemical mud.

Rotary drilling rigs generally use hydraulic crawler telescopic chassis, self-landing folding folding mast, telescopic drill pipe, with vertical adjustment of vertical adjustment, hole depth digital display, the whole machine is generally used hydraulic pilot control, load sensing, With the operation of light, comfortable and so on. Rotary drilling drilling construction to be equipped with a special rotary drilling mud waste management system.

Domestic experts believe that: rotary drilling rig in the next few years there is still a large market. The rotary drilling mud treatment system is an important part of the rotary drilling construction

1. Rotary Drilling Rigs Slurry System can help to drive the drilling mud to achieve balanced formation pressure: Rotary Drilling Rig for chemical mud slurry pressure must be balanced with the formation pressure in order to prevent blowout or rotary drilling rigs for a large number of chemical mud into the formation of the purpose The Can adjust the density of the mud by controlling the mud column pressure, so that it is balanced with the formation pressure, play the role of anti-leakage plugging.

2. Rotary Drilling Rigs Slurry System can help rotary drilling mud to achieve cooling lubrication drill bit: rotary drilling rig for chemical mud can be drilling process drilling (drill bit and drill string) and stratum friction generated by the heat to the ground, from the cooling effect. At the same time, rotary drilling rig for chemical mud can effectively reduce the friction between the drill and the formation, from the lubrication effect.

3.Rotary Drilling Rigs Slurry System can help to drive the drilling mud to achieve a stable borehole wall: Rotary drilling rigs can be used to create an excellent viscosity environment at lower concentrations. Rotary drilling rigs with chemical mud of the long molecular chain package Disordered dispersion of mud, through the formation of different layers of connecting bridge to ensure the stability of the surrounding strata, to stabilize the role of the wall.

4. Rotary Drilling Rigs Slurry System can help rotary drilling mud to achieve suspended cuttings: when the cycle, the rotary drilling rig for chemical mud in a stopped state, which rotary drilling rigs for chemical mud polymer can be linked to each other to form a structure, The cuttings will be suspended.

5 Rotary Drilling Rigs Slurry System can help to drive the drilling mud to achieve the transmission power: rotary drilling rig for chemical mud can be mud pump power from the drill string from the drill pipe high-speed jet to the bottom of the drill hole to improve the ability to break the rock Drilling speed.